Type
A wide-body ATX chassis built around airflow: a full-face steel-mesh front feeds three 120 mm intakes, the top deck takes a 360 mm radiator, and eleven fan positions keep the build moving — with room for an E-ATX board, a 400 mm card and a 165 mm cooler.
01 — Intake
Punched, not slotted. A full face of punched steel mesh feeds the three front intakes without smothering the lighting behind it — ARGB fans throw their light through the mesh, not around it.
02 — Cooling
Raised and offset. The top deck is raised and offset, so a 360 mm radiator and its fans sit above the motherboard rather than over it. Tall memory clears the assembly and the radiator drops straight in.
03 — Capacity
Wide where it matters. The tray carries E-ATX, ATX, Micro-ATX and Mini-ITX mountings, with 400 mm of card clearance, seven expansion slots and 165 mm of cooler height measured to the panel.
04 — Airflow
Low in, top out. Cool air enters low and forward, crosses the main chamber and leaves through the top and rear. Front and right side panels are both punched, so the board sits directly in the flow.
The Nova GX750C is a wide-body ATX chassis: E-ATX board support, a 360 mm top radiator, eleven 120 mm fan positions and 400 mm of graphics-card clearance, framed in 0.6 mm SPCC steel behind a full-face mesh intake.
Available as an OEM/ODM program: your own brand, packaging and cable/fan configuration, and the certification and labelling your market requires — including EAC marking for the Eurasian Economic Union and CE for the European Union. Tell us your market and volumes and we will confirm current certificates and lead times.
E-ATX, ATX, Micro-ATX and Mini-ITX boards all mount on the same standoff pattern. Internal layout and clearances are listed in the specification table above.
Yes. The top bracket takes a 360, 280 or 240 mm radiator, and the wide body leaves room for additional air cooling with up to eleven 120 mm fan positions.
Yes. Seven expansion slots and up to 400 mm of GPU clearance take current flagship graphics cards, with the PSU shroud keeping cables out of sight.
The extra width clears a 165 mm CPU cooler and adds two fan mounts on the motherboard side, for eleven positions in total. It accepts E-ATX boards, a 360 mm top radiator and 400 mm cards in a 0.6 mm SPCC frame.
Yes. Colour, panel finish, fan configuration, packaging and branding can all be customised for volume orders. Contact info@sny-inc.com to discuss your project.
Yes — including EAC marking for the Eurasian Economic Union and CE for the European Union. Tell us your market and volumes and we will confirm current certificates and lead times.
Part of the SNY factory line, built under the same OEM/ODM programme.
Looking for something specific? Tell us what you need or email info@sny-inc.com.